UV-LED Complete set with built-in flow sensor 4lt./min. (1,05 GPM) filtered water - 4,74lt./min. (1,25 GPM) osmotized water 8W -

UV-LED Complete set with built-in flow sensor 4lt./min. (1,05 GPM) filtered water - 4,74lt./min. (1,25 GPM) osmotized water 8W - 1/4" quick-fit (30)

UV-LED systems represent the direct evolution of traditional UV systems for eliminating bacteria in water.
They eliminate up to 99.9% of bacteria, viruses, and pathogens without the use of chemicals, residues, or unpleasant odors. This is the ideal solution for those seeking immediate and continuous protection, even against invisible microorganisms such as E. coli, Salmonella, and Giardia.

Advantages
- Instant disinfection: UV-C light acts within seconds, instantly neutralizing pathogens.
- Chemical-free safety: no taste, odor, or residue in the treated water.
- Instant on/off: UV-LEDs start functioning instantaneously, without needing a warm-up time
- Integrated flow sensor: thanks to it, the system recognizes the passage of water, the blue ring at its base lights up, and it starts working; conversely, when the water flow is interrupted, the blue light goes off, and the system shuts down
- Eco-friendly and mercury-free: safer for the environment than traditional UV lamps thanks to the absence of mercury.
- Low maintenance: real lifespan of 1.500 hours, counted only during actual water dispensing.
- Stable water temperature: LEDs can emit photons from a different surface than their heat emissions and can therefore be used in water purification without transferring heat to it in any way.

Single-use LED UV Lamp with Automatic Activation
Innovative single-use LED UV lamp designed to turn on only when water flows through (up to 4 liters per minute), ensuring optimized energy efficiency.
With a total lifespan of 1,500 hours, it can last for several years depending on daily usage (more than 2 years if used for 2 hours per day).
Perfect for filtration systems, purification setups, and professional applications requiring safe, continuous water disinfection without unnecessary power consumption.

Transformer included.

Applications
- Residential
- HoReCa
- Industrial
- Laboratories
- Food & Beverage
- Chemical sector

Technical specifications:
Power supply: 24VDC / 220VAC
Fittings: 1/4" quick fittings
Dimensions: 38mm x 129mm
Power: 8W
Maximum flow rate: 4 lt/m
Service Life: 3 years
Mercury-free

Water requirements for optimal performance:
Hardness: <120 mg/l
Manganese: < 0.05 mg/L
Iron: < 0.3 mg/l
Temperature: 0-45 °C